Repair Anywhere do frame welding??

[mumble5]

Does anyone know of anyone fairly local who does frame welding of MX bikes?

[Gaylord_Fokker]

roughly where abouts are you based ?

[Dobstar#5]

roughly next door to me

[Gaylord_Fokker]

... in that case i know a very good frame welder...roughly 190 miles from the pair of you

[Dobstar#5]

i bet hes roughly near you

[#8_]

What part needs welding?

Be aware that if its a painted frame the area for weld will need to have the paint removed, and the heat from welding will also damage the paint. Make sure all electrics are disconnected and taken off the frame also.

Any metal fabricator or engineering workshop should be able to weld it for you

[Dobstar#5]

its on the top hole of the bracket for rear caliper on RMZ 250... where you put the bolt through its cracked ... ille see if i can get a pic up

[Dobstar#5]

here we go iphone to email to racersedge in 5 mins orsum

[#8_]

Thats an easy enough fix for any ally welder. Just remember to disconnect the electrics on the bike before hand.

In the meantime, undo the bolt, chuck a 6mm penny washer on and do it back up. That'll keep it strong untill you get it welded

[mumble5]

Think that's the next step then. Eurofastners here I come....

Thanks all.